PDA

View Full Version : non jeep axle stock gearing?!

trashedxj
November 13th, 2006, 12:10
hey what vehichles have deep gears? like f250's f350's, dodge trucks, chevy, or whatever. like what gears do some of these have that i could get at a junk yard, re weld mounts and BAM not only did i not have to spend an arm and a leg for 4.56 gears but i got up graded axles too?
Lawn Cher'
November 14th, 2006, 12:21
Most 3/4 & 1-ton trucks have 4.10 gear options.
trashedxj
November 14th, 2006, 13:03
heck yeah. anyone know of what year chevy had 4.56 stock. a guy i used to work with has a old chevy sittin on 38's and he has stock 4.56 gears!
Lawn Cher'
November 14th, 2006, 13:19
You could look for a chevy forum, or search around on Pirate.
rmm727
November 14th, 2006, 13:31
I had an 84 Chevy 1 ton 2wd with a FF 14 bolt with 4.56 gears. It had a 292 inline six with a 3spd auto and a propane conversion. (used to be a pittsburgh press truck)
Menzenski
November 14th, 2006, 13:39
You could always get the D30 and D35 (maybe an 8.25, I don't know) out of an XJ with a 2.5L and AW4; those axles would have 4.56s.

Don't some Isuzu D44s have stock 4.56s?
Beej
November 14th, 2006, 13:42
You could always get the D30 and D35 (maybe an 8.25, I don't know) out of an XJ with a 2.5L and AW4; those axles would have 4.56s.

Don't some Isuzu D44s have stock 4.56s? Not to say its an impossibility, but I've never come across a 2.5L with an auto behind it...

Also, wouldn't the chevy axles be driver's side drop?
trashedxj
November 14th, 2006, 13:51
yeah i've looked at the junkyards around here(all 5 of them) and came up with no 2.5 wit a auto. and i dont want stock axles. i was going for the axles that are bigger better and had deep gears stock so all i would have to do is some re welding on the mounts and full width style! i dont know just though comein from a junk yard i could prolly get them for like 250-300 each and have paid less than a grand for beefy axles with gears and maybe even LSD(limited slip differential......LSD, yeah i know what some of you was thinkin!)
Menzenski
November 14th, 2006, 14:07
You could always get the D30 and D35 (maybe an 8.25, I don't know) out of an XJ with a 2.5L and AW4; those axles would have 4.56s.Not to say its an impossibility, but I've never come across a 2.5L with an auto behind it...
http://www.naxja.org/forum/showthread.php?t=71960
Beej
November 14th, 2006, 14:11
http://www.naxja.org/forum/showthread.php?t=71960 See, that's what I love about this club, I learn something new everyday...

:D
westvirginia24976
November 14th, 2006, 15:42
Lawn Cher' LMFAO It's good to see your shining face! HAHAHAHAHA
serialphreak
November 14th, 2006, 18:36
YJ's with 4cyls had 4:10's
JohnX
November 24th, 2006, 21:36
Also, wouldn't the chevy axles be driver's side drop?


???????