2low shifting problem

is the shift pattern the same as stock? (other than the extra range) does all the ranges engage at the same points?

for some reason i only have 3 ranges. i have a 2 or n, 4, and a 2 or n. (going by the light and by shifting from the tc itself.

anyone have any advice on this.

tia

You'll have to get under the jeep and adjust the linkage a bit to get the 2low shiftg point. At least I did on mine. There is a bolt on the linkage that will allow you to move the lever forward abit so you can get at the 2low shift point all the way to the rear.