-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
Mystery Plug #2
- Thread starter 96XJ_4.0
- Start date
97XJ2
NAXJA Forum User
- Location
- Wisconsin & the U.P.
Washer fluid sensor plug?
- Location
- Rainy side of Washington
underhood light.
It should have a plastic piece taped to it about 4" long on the outside of the loom. If you look at the edge of the hood about 1/3 in from the passenger side you'll see a couple holes for the bolts that the light mounts with. Don't bother hunting one down in the JY, they're nearly worthless, just get yourself a light you like the look of and mount it there.
EDIT: also remember that that connector is constant powered and if you don't put a switch (or preferably a tip/mercury switch) on it, the light will stay on with the hood down and will drain your battery!
It should have a plastic piece taped to it about 4" long on the outside of the loom. If you look at the edge of the hood about 1/3 in from the passenger side you'll see a couple holes for the bolts that the light mounts with. Don't bother hunting one down in the JY, they're nearly worthless, just get yourself a light you like the look of and mount it there.
EDIT: also remember that that connector is constant powered and if you don't put a switch (or preferably a tip/mercury switch) on it, the light will stay on with the hood down and will drain your battery!
BenDiesel
NAXJA Forum User
- Location
- lynnwood washington
its for the reconbobulator. its what re assembles your molecules after you been transported in time by the flux capacitor
Thanks man!
