On site tool thread.....

[XJ&CHZ4ME]

OK, NO, we are not refering to Aaron on this thread! :D This thread is set up to have anyone that wants to post up on the tools that they will be bringing with them to WF for needed repairs.

I know that Kim usually travels like the MAC tool van (thank God for this, I HAD to use this welder last year!), but is anyone bringing anything specific other then common hand tools?

Kim, are you bringing your welder again this year? If not, I can throw in my little 110 hot box if needed.

Please post up if you plan on bringing anything special...

Thanks

Cheeseman-OUT!

[bmyohn]

OK, NO, we are not refering to Aaron on this thread! :D

I couldnt read anything else that you wrote after this :yelclap::yelclap::yelclap::yelclap::yelclap:

5 out of 5 claps for you

[hanaxj87]

I'll have a few things....Including a home made on board welder.

Nothing fancy ....;)

Nick

[FlexdXJ]

Just wait Tyler, just wait! .l.:D.l.

I have a couple TRE's, a couple u-joints, a socket set, Various other tools, and something special for Tyler. :D Not sure if they are 260's or 297's. I think they gave me the wrong ones. :dunno:

[mrmikey32]

ill have a full set of sockets. really cant think of anything else.

[BRIANHO13]

I will have a sawzall (and other stuff), I just know one of these years we are gonna cut the top off someones rig........

[sgtmack]

I will have my ball joint press. The year I needed it I left it at home. I'm hoping if I bring it I wont need it.

[mrmikey32]

ohh. i can bring another sawzall. i forgot i had that.

[hanaxj87]

I will have my ball joint press. The year I needed it I left it at home. I'm hoping if I bring it I wont need it.

I have the ball joints....X2 on hoping we won't need them.

Nick

[87manche]

I will have my ball joint press. The year I needed it I left it at home. I'm hoping if I bring it I wont need it.
you needed more than the press that year!

[seanR]

I will have A LOT of tools with me.
I will also throw in the Hobart 185.

[85xjwoody]

If others are bringing a welder I am not. I have enough crap to bring along. Need to make sure I bring the extra leaf springs.:D I will have many spare parts and many tools.

Starter, alternator, axleshafts for the d30, driveshafts, leaf springs, and much more.:D

[XJ&CHZ4ME]

I will have A LOT of tools with me.
I will also throw in the Hobart 185.


are you referenceing me since I am in your trail group? :D

If sean has the welder covered, I am not going to drag along mine either.

[cardboard]

28 Volt Cordless 1/2" impact with 2 freshly charged batteries. We can change tires in less than 2 minutes. :D
cardboard

[bmyohn]

or we can get drunk at the campfire and do "pit" stops on our jeep lol

[RedHeep]

I have the cordless impact with me, the angle grinder with cutoffs and flaps, all 4 of my 6 ton jackstands and my floor jack.

I went light on the tools this time around since I knew everyone would be there. My sockets, wrenches, etc. will be in the jeep on the trail.

Edit: And my 1/2" milwaukee drill, in case anyone wants to play "lets get drunk and see who doesn't break their wrist"

[macgyvr]

I am not bringing any tools except this list of who has what...

mac 'will bring boards to break over my head...nope that's john' gyvr

[Pat]

Several of the items already listed, plus...3 foot pipe wrench, rescue hook (new addition).

[Rev Den]

DMM, SWR meter, a few hand tools, Nitril gloves, etc.

Rev

[IllianaXJ]

Normal assortment of tools, couple of spindle nut sockets, pickle forks. Ujoint/ball joint press if I remember to throw it in.

[mrmikey32]

i will have all of my electrician tools as well. probably a good amount of wire too.

[RedHeep]

DMM, SWR meter, a few hand tools, Nitril gloves, etc.

Rev

Couldn't find my meter, can I borrow yours? I brought the patch cable.

[GoSlowGetStuck]

I will have a sawzall (and other stuff), I just know one of these years we are gonna cut the top off someones rig........

Yea I think you were pushing for that at Harlan. We shoulda just gone for it, I ended up getting rid of that rig anyway.

DMM, SWR meter, a few hand tools, Nitril gloves, etc.

Rev

SWR meter would be awesome to borrow for a bit.

I've been lax lately but in the past I've come reasonably prepared, small impact/sawzall, mallet/hammer, ratchets/sockets/wrenches. I'll bring the full loadout this year. Nothing too fancy since I don't own anything too fancy.

[HaleYes]

Yea I think you were pushing for that at Harlan. We shoulda just gone for it, I ended up getting rid of that rig anyway.



SWR meter would be awesome to borrow for a bit.

I've been lax lately but in the past I've come reasonably prepared, small impact/sawzall, mallet/hammer, ratchets/sockets/wrenches. I'll bring the full loadout this year. Nothing too fancy since I don't own anything too fancy.

Do you carry wood blades for your sawzall?:D

Never know when a guy might need to do an impromptu bumper mod.

[mrmikey32]

Do you carry wood blades for your sawzall?:D
i have 6

[GoSlowGetStuck]

Do you carry wood blades for your sawzall?:D

Never know when a guy might need to do an impromptu bumper mod.

Oh I totally forgot about that! Well assuming I have the extra space I will be bringing those "custom fabricated" bumpers for the fire. :flame:

[BOB]

other than the usual, I will have portable jumper with electrical outlet thing. Those are pretty handy. gives me a little peace of mind to have it with.

any welders have a piece of metal to tack to one side of my trailer fender. It has some rust and flops around some.

BOB

[XJ&CHZ4ME]

BOB, I will try and remember to thow in a piece of strapping or some scrap and we will try and get ya fixed up. :thumbup:

[seanR]

I didn't even think about it, but 220 welders will not plug into an RV outlet.
But, I made an extension cord today, so my welder will now work off of a 110/220v 50a outlet.

[BOB]

BOB, I will try and remember to thow in a piece of strapping or some scrap and we will try and get ya fixed up. :thumbup:

Thanks Cheeseman!! :yelclap:

BOB

[XJ&CHZ4ME]

I didn't even think about it, but 220 welders will not plug into an RV outlet.
But, I made an extension cord today, so my welder will now work off of a 110/220v 50a outlet.

Thanks Cheeseman!! :yelclap:

BOB

since sean got his cord made and we will have a welder on site, I will throw in some scrap and we will rig something up for ya...just short of Fred Sanford! :D

[seanR]

since sean got his cord made and we will have a welder on site, I will throw in some scrap and we will rig something up for ya...just short of Fred Sanford! :D

http://www.toplessrobot.com/sanfordsonchristmas.jpg
Fred and LeMont....

[HaleYes]

Ya big dummy!

[XJosh95]

I'll have my OBDII engine code scanner...it'll clear them at the very least.

[HaleYes]

I'll have my OBDII engine code scanner...it'll clear them at the very least.

I'll take you up on that. My CE light has been on for 3-4 months now. I've not bothered to check it out.

[seanR]

pull the bulb out

[mrmikey32]

ill also have an obd2 scanner too. didnt think about that.

i have obdI

[HaleYes]

pull the bulb out

No kidding...........

I'd just like to know what its on for. I'm horrible at counting flashes.

[97XJ2]

I have a scanguage II in the jeep, so its a code reader/guage pack. Wrenches, Sockets, Crowbar, LFH, PB Blaster, Smoke Wrench

[bmyohn]

Extra Blinker fluid and I have a flux capacitor out of aarons old jeep

[97XJ2]

I need a 10/32" tap. Anybody?

[sgtmack]

If I haven't lost it, I'll throw mine in the tool box in the morning.

[97XJ2]

Let me know if you do or don't either way I need to get a CB antenna ready.

[dozer_xj]

I will have my ball joint press. The year I needed it I left it at home. I'm hoping if I bring it I wont need it.
YES PLEASE!!!!!! I plan to beat my jeep like it owes me money and I dont have time to change my ball joints which have some play in them already!

dozer 'going to break my jeep and be that guy' xj

[woody431]

haha coming from dozer 'i break 44 u-joints in my front yard' xj

Just messin with ya

[XJosh95]

I'll take you up on that. My CE light has been on for 3-4 months now. I've not bothered to check it out.

Sure thing Hale! :thumbup:

[XJosh95]

Extra Blinker fluid and I have a flux capacitor out of aarons old jeep

I wanted that!! Dammit! I'll trade you some elbow grease and a muffler belt for it? Maybe we shoud take care of this in the WF Swap Meet thread?

[HaleYes]

Aaron is a tool.........he will be there.........:D

[XJ&CHZ4ME]

Aaron is a tool.........he will be there.........:D


HAHA! See post #1...great minds think alike!!

[sgtmack]

I need a 10/32" tap. Anybody?

It's in the tool box.

[HaleYes]

HAHA! See post #1...great minds think alike!!

Huh.........skipped right over that.:laugh3:

[bmyohn]

Aaron is a tool.........he will be there.........:D

Is it bad that this is the first thing that i thought too? :D

[HaleYes]

Is it bad that this is the first thing that i thought too? :D


Nope.
See post #49.
:D