View Full Version : 96 factory fog light wiring
gba88
November 4th, 2006, 05:09
I searched, but couldn't find this specific.... I have a 96 that has the module that plugs onto the back of the factory fog light switch. I bought a switch from ebay, and was hoping that I could break into a harness under the hood somewhere to run some lights.
Can soemone tell me if this is possible, and if so where I can get at the appropriate wires under the hood? Thanks!
ILLXJ
November 6th, 2006, 03:30
Check under the front bumper or behind the grill. You may already have the wiring there. JIM.
gba88
November 6th, 2006, 08:33
Check under the front bumper or behind the grill. You may already have the wiring there. JIM.
Unfortunately that was the first thing I did.......Nothing to be found there :( Thanks for the suggestion though!
ILLXJ
November 6th, 2006, 23:56
In that case I would get a good FL kit. One that comes with all the wiring & the relay & wire it to the factory switch. Or buy the relay & build your own harness. JIM.
vBulletin® v3.8.3, Copyright ©2000-2012, Jelsoft Enterprises Ltd.