WTB 3 inch lift rear XJ shocks

[dsgray16]

Anybody got any of these laying around? any condition as long as they work..

[brokexj]

http://cgi.ebay.com/ebaymotors/Superlift-Black-Diamond-XT-Gas-Shock-Absorber-788054_W0QQcmdZViewItemQQcategoryZ33585QQihZ019QQi temZ7916956156

Superlift's ebay store, the part # is for the rear of an XJ. Shipping was about $14 for 2 shocks.

[MrShaft696]

go down the street grab some comanche shocks, they will be plenty long

[dsgray16]

go down the street grab some comanche shocks, they will be plenty long

Hmm, ill have to look into this

What happened is i have the TNT shock mounts, so i was running stock shocks with about 5 inches of lift. i just put the new Alcan leaves in so now the stock shocks dont fit.

[MrShaft696]

Hmm, ill have to look into this

What happened is i have the TNT shock mounts, so i was running stock shocks with about 5 inches of lift. i just put the new Alcan leaves in so now the stock shocks dont fit.

check the rocklizard write up for the measurements
http://www.rocklizardfabrications.com/home_brew_budget_boost.htm
I have the autozone brand shocks and about 4in of lift out back cant say its perfect but they are long

[dsgray16]

The length on those MJ ones are 14/23" The 3 inch lift shocks from Rustys are 15/25" Im thinking thats what i will need...gota go home and measure i guess

[LilRhodyXJ]

Dan I have my Rustys 3" shocks, Im switching them out for OME

[heapxj]

Flex and measure my friend. Go to Quadratec, they list every shock by collapsed and extended lengths. You're bound to find something you need. I have to do the same because I also have stock shocks in the rear and will only extend about another 1". The revolvers are getting anxious, haha.