Toys for tots

[jeepfreak1020]

Whos all going to join me in the toys for tots this year?

http://www.hcp4x4.com/Portals/0/images/news/Poster-1.jpg

[boomer1]

My son and I went last year, had a blast. We'll have his 88 cherokee and maybe my 76CJ this year.

Freek - I have a stock cross member from a 1990 5-speed if it's something you could use, send me a PM

[jeepfreak1020]

Cool which place are you going to meet at to group up with?

[boomer1]

we'll be going over to the Westminster Mall

[jeepfreak1020]

cool thats the same one ill be meeting at as well

[old_man]

Anybody have any info on a NorCo group?

[yankeefan303]

i am pretty sure we are in too

[Kiefer316]

Ill be meeting at the south west plaza mall.

[Rock Yacht]

We'll have a booth set up so stop by say "hi" and check out our HyLine Hemi TJ on 42's and our new Adventure Series Jeep JK!:thumbup:

[flingshot]

We'll be at Westy.

[jeepfreak1020]

We'll have a booth set up so stop by say "hi" and check out our HyLine Hemi TJ on 42's and our new Adventure Series Jeep JK!:thumbup:

Ill be sure to stop by. To bad you wont have your Xj this year though.

[boomer1]

Freek - you got a pm

[.40CalPatriot]

we'll be going over to the Westminster Mall

cool thats the same one ill be meeting at as well

We'll be at Westy.

I should make it as well. See you guys at the mall.

[jeepfreak1020]

Well everyone here just look for the NAXJA stickers and well know whos who :roflmao:

[xj-grin]

is there a soco version?

[AvsXJ99]

The guys up north usually meet up some where central and then drive down to Westminster Mall to meet up with everyone else.

The southern guys meet up and then drive to the I-25 and Arapahoe Home Depot.

All the locations then depart their gathering points at 1000 and caravan to the Jefferson County fair grounds.

It's a good time. I've done it the last 4 years.

[9T3XJ]

I'll be going for sure this year. I'll be coming down from ft. collins if anybody wants to meet somewhere up north and drive caravan down.

[jeepfreak1020]

Just letting you guys know that all the caravans are departing each location at 10AM

[G.P_XJ]

If my cherokee was drivable i would be there in a heart beat, sad to say i cant drive it :(

[Kiefer316]

Doesn't look like ill be able to make this one. :( Maybe next year.

[time2getdirty]

We'll be at Westminster Mall at 9:30, cb channel 16.

See you all there!

[jeepdude25]

will be in the TOYS FOR TOTS South region run.....in the Springs!!!

[Hypoid]

How did this turn out??? It was rumored to me that the Treks XJ that was recently on the market would be there...

[mcantar18c]

How did this turn out??? It was rumored to me that the Treks XJ that was recently on the market would be there...

Turned out pretty good, must've been a few hundred or so rigs there.
Treks had a few of their Jeeps but I don't remember seeing the XJ they sold on CL. They had a couple really cool Grands though, and their HyLine Hemi TJ was there too... that thing is awesome.
I have some pics, I'll upload them later.

[jwtrapper]

Who won the Jeep????

[jeepfreak1020]

Some guy from Minnesota, and the runner up was from Kansas :doh:

[jwtrapper]

Dang it! Oh well, I guess I'll try again for the next one.

[jwtrapper]

Was it finished and running?

[time2getdirty]

NO! That thing had a lot of work to be done... Its not even wired up yet! I saw some crazy guy in a yellow CJ, crazy driving in the parking lot.:eeks1:

[SurfXJSnow]

if i can recall it was a purple YJ right? i entered the drawing back in august at the county fair in pueblo. looked like a pretty sweet rig, minus the purple paint job and the flames...

oh well, better luck next year.

[mcantar18c]

I saw some crazy guy in a yellow CJ, crazy driving in the parking lot.:eeks1:

:D
Yeah you know you're jealous :moon:
http://www.cojeeps.net/forums/images/smilies/jeepsmilietryellow.gif

[mcantar18c]

Pics...


Good turn out... this is just one tiny corner of the lot.
http://i984.photobucket.com/albums/ae329/mcantar18c/photo5-1.jpg

Boris is about 5'5"
http://i984.photobucket.com/albums/ae329/mcantar18c/photo3-1.jpg

Alloy D44 shafts with a built in joint protector thingy, pretty cool but I forgot who makes em :doh: Something like $900 for 44 shafts and $1600 for 60's :shocked:
http://i984.photobucket.com/albums/ae329/mcantar18c/photo2-4.jpg

Sickest XJ I've ever seen. Sits on 38s. All of the armor is custom.
http://i984.photobucket.com/albums/ae329/mcantar18c/photo-10.jpg

And I couldn't leave without a pic of this one. Coilovers, 60/44, linked, the whole 9 yards.
http://i984.photobucket.com/albums/ae329/mcantar18c/photo4-2.jpg

[collkid]

XJ's too big for me!

Though I do like the Yellow.

[YELLAHEEP]

Sickest XJ I've ever seen. Sits on 38s. All of the armor is custom.
http://i984.photobucket.com/albums/ae329/mcantar18c/photo-10.jpg


THAT'S the sickest XJ you've ever seen???? Sick for a mall crawler maybe ...... 38's on a D30.... stock steering....... bent rear bumper corner armor thingy..... front flares only....... lookie-loo stinger. Can't imagine he wheels it much.... no bumpstops on the front (you can see through the coil spring) and the fender is straight as an arrow. With as low as that flare sits on that fender, that tire hasn't flexed up like it "could" - woulda bent the snot outta the fender. The color is about the only "good" thing going for it. :D Don't get me wrong - it's definitely someone's pride and joy...... but it's far from any of the sickest XJ's out there.

And I couldn't leave without a pic of this one. Coilovers, 60/44, linked, the whole 9 yards.
http://i984.photobucket.com/albums/ae329/mcantar18c/photo4-2.jpg

That Subie has a build thread over here:

http://www.colorado4x4.org/vbb/showthread.php?t=109844&highlight=subaru+build

Member named "Camp" built it a while back. Definitely some unique work put into that thing. :thumbup:

http://i445.photobucket.com/albums/qq172/the303hooligan/IMG_1387.jpg

[Kiefer316]

Ha those look like xj bushwackers

[G.P_XJ]

Pics...

Alloy D44 shafts with a built in joint protector thingy, pretty cool but I forgot who makes em :doh: Something like $900 for 44 shafts and $1600 for 60's :shocked:
http://i984.photobucket.com/albums/ae329/mcantar18c/photo2-4.jpg


they are made by RCV performance

http://www.polyperformance.com/shop/RCV-Performance-p-1-c-1201.html

[xj-grin]

they are made by RCV performance

http://www.polyperformance.com/shop/RCV-Performance-p-1-c-1201.html

Pretty cool CV joint -- I read about them in JP this month. Supposedly strength equivalent to a D60 in the D30 application, and no strength loss in turns... pretty freaking pricey though...

[G.P_XJ]

Pretty cool CV joint -- I read about them in JP this month. Supposedly strength equivalent to a D60 in the D30 application, and no strength loss in turns... pretty freaking pricey though...

They are pricey but you cant be the " ...Comes with our “You break it and we’ll replace it” warranty..."