WF Swap Meet

[96 XJ Sport]

Any of you guys with ZJs, I have an overhead console from a ZJ. Grey fabric is in very good shape. It's only missing that little drop down door where you put your sunglasses. I ended up with it by mistake. Make me an offer. I bet I'll take it :D

[BRIANHO13]

I have a 38" bald swamper on a new looking ar black steelie, 5 on 5.5 with 4" backspace. will trade for one beer.

[bmyohn]

does natty light suffice? :D

[FlexdXJ]

does natty light suffice? :D

Better give him 3!

[Fore Wheeler]

I have a 38" bald swamper on a new looking ar black steelie, 5 on 5.5 with 4" backspace. will trade for one beer.

how bald?

will trade for one beer if it holds air. then i can have a spare to meet inspection.

[BRIANHO13]

how bald?

will trade for one beer if it holds air. then i can have a spare to meet inspection.

It held air last time I filled it........2 years ago. Its pretty bald, not as bald as you but pretty bald.

[Fore Wheeler]

It held air last time I filled it........2 years ago. Its pretty bald, not as bald as you but pretty bald.

it will be a perfect 'spare', enough to get me off the trail if needed. u like bud light? good.

[85xjwoody]

Anyone happen to have a stock rear bumper? Looking for a chrome one but any other color will do. Needs to fit 84-96.

Kim

[RedHeep]

Anyone happen to have a stock rear bumper? Looking for a chrome one but any other color will do. Needs to fit 84-96.

Kim

I think the one from the '91 is in the storage unit. I have to go there today anyway to find some wheeling crap. I'll check.

It's red. If I find it, you can have it.

[XJosh95]

Anyone happen to have a stock rear bumper? Looking for a chrome one but any other color will do. Needs to fit 84-96.

Kim

I'm picking one up from a guy down there for mine, that would leave mine available if you want it. It's black and beat to hell...so, I would understand if you didn't want it. It would be free though.

[XJosh95]

I've got a window attaching Badlands trail flag if anyone needs a flag...However much they charge for them in the office, cut it in half. Some newbie is sure to need one.

[85xjwoody]

I will take both of the bumpers. Thanks guys. They can be painted.

Kim

[XJosh95]

Marked it on the list!

[IllianaXJ]

I have a pair of 97+ tail lights (candied turn signals, so they are all red with white reverse lights)


-Brendan

How much beer ya need for these?




I have several orange flags I will throw in for whoever needs one. No charge, keep em if you need em. I'm not sure how many I have, just come find me if you need one.

Beer donations accepted :D

[bmyohn]

How much beer ya need for these?


how about a 12 pack of rolling rock? The passenger side is missing one mount hole (snapped off) but a piece of aluminum worked fine for me to hold it in place using the factory bolt. the other one is brand new (plus the candied turn signal)

[poorboy87]

How much beer ya need for these?




I have several orange flags I will throw in for whoever needs one. No charge, keep em if you need em. I'm not sure how many I have, just come find me if you need one.

Beer donations accepted :D

Ill take one Byron, In trade for a silver bullet or two. Sound good?

[97XJ2]

I've got a window attaching Badlands trail flag if anyone needs a flag...However much they charge for them in the office, cut it in half. Some newbie is sure to need one.

Ill take that. I'm assuming its a suction cup thinger and will meet the requirements.

Missed this... I have several orange flags I'd be needing something to stick it on thought I'm guessing.

[IllianaXJ]

Brendan - sounds good.

Tim - sounds good.

97XJ2 - zipties always work for me.

[bmyohn]

Brendan - sounds good.

good deal bud. They are on the list of things to bring along.


On another note, I have a rear drive shaft out of my XJ that I used with for my SYE when i was on 3.5"s of lift. I can get measurements if needed. The rear u-joint needs replaced but otherwise it's in good shape. Free to a good home :rattle:

[97XJ2]

97XJ2 - zipties always work for me.

Its what I figured, zip tie to antenna. Since you were quicker on the response. I'll toss a couple (beers) your way then for that.

[bmyohn]

I like how we all use beer as a perfectly good substitute for cash. I feel like I'm going to a party at IU lol

[97XJ2]

Its the college student in me.

[XJosh95]

Sorry I didn't get to the response first. Mine goes on top of a window and you just snug the window up and it tucks into the window frame. If anyone needs it...

[IllianaXJ]

Found some stuff in the shed.

Roof rack rails and crossbars from a 01. This is the shorty rack from the B pillars back.

One chrome headlight bezel thingy for a 96-down. Driver's side.

Make offers.

[HaleYes]

Need a short side axle shaft for a spare.

[XJ&CHZ4ME]

didn't I give you one of those at the Pig Gig??

[HaleYes]

didn't I give you one of those at the Pig Gig??


It's a long.

Jim trashed a short side today.

We could actually get by with just a stub.

[XJ&CHZ4ME]

I have about half dozen misc shafts in the shop, I will throw them in. I will check tomorrow to see what shape I'm in on short side shafts or stubs. All I would have are 297 units, no dinky ones around here :D

[RedHeep]

Need a short side axle shaft for a spare.

I have one, needs a u-joint. It started to spit the cap out in Moab so I swapped it out with my spare.

[poorboy87]

Still got
AW4 $125
Stock coils
Rusty ones free
Good ones $10
4 Stock shocks. Still worked good.
Jeep donut with Fancy vynle cover and jacking instructions lol Free


I do need a Drivers two door manual window regulator. The gears are stripped on mine.

[RedHeep]

Does somebody have a set of the stock coil isolators laying around?

I took out the 2" spacers and now it's riding on the metal.

Oh, I have 2" spacers for a beer or two :)

[85xjwoody]

Does somebody have a set of the stock coil isolators laying around?

I took out the 2" spacers and now it's riding on the metal.

Oh, I have 2" spacers for a beer or two :)

Just scrapped out a jeep the other day and thought about taking those off. They went with the jeep. I think I might have a set somewhere else. I will look today.

[XJ&CHZ4ME]

I will look for ya as well Josh. I think I have a good set in the "box-o-parts" in the shop.

[RedHeep]

Thanks fellas. They'll be easy to install.

[97XJ2]

I'll take 2" spacers for a beer or two

[IllianaXJ]

Does somebody have a set of the stock coil isolators laying around?

I took out the 2" spacers and now it's riding on the metal.

Oh, I have 2" spacers for a beer or two :)

I think I still have one laying under the seat in my Jeep. Yours if you need it.

[macgyvr]

I still have a 96 8.25 29 spline 3.55 gears complete drum to drum with ebrake cables for $100. Needs brakes. Not bringing it unless some speaks up.

mac 'already bringing everything but the kitchen sink' gyvr

[HaleYes]

I have one, needs a u-joint. It started to spit the cap out in Moab so I swapped it out with my spare.
D30 I presume?
I should have specified but, I suppose most of you know what I've got anyway.......

[RedHeep]

D30 I presume?
I should have specified but, I suppose most of you know what I've got anyway.......

Yeah, the long side was screwed. It came out on fins and things on wednesday with twisted splines and broken ears. The short side I "thought" I heard making noise on that thursday when we were out with Rev, so I took it out before our Moab Rim run with Mac on friday.

I would put a new u-joint in it, but there's nothing else wrong with it. You want it?

[HaleYes]

Yeah, the long side was screwed. It came out on fins and things on wednesday with twisted splines and broken ears. The short side I "thought" I heard making noise on that thursday when we were out with Rev, so I took it out before our Moab Rim run with Mac on friday.

I would put a new u-joint in it, but there's nothing else wrong with it. You want it?


Yeah, we could use it. I'll put a new joint in it when I get home. Hopefully, I won't have to put the new joint in it @ WF. Hoping there's not a need for it. Let me know what you need out of it.

I'd still like to have a stubby if Tyler can locate his. <------feel free to use as a sig line.

[XJ&CHZ4ME]

OK, you talked me into it.....ya know JJ and I are half brothers, right?? :D

[RedHeep]

Yeah, we could use it. I'll put a new joint in it when I get home. Hopefully, I won't have to put the new joint in it @ WF. Hoping there's not a need for it. Let me know what you need out of it.

I'd still like to have a stubby if Tyler can locate his. <------feel free to use as a sig line.

Nothing required. :farmer:




I always wanted to put that smilie somewhere.

[mrmikey32]

i could use a tow strap.... anyone wanna sell one?

[FlexdXJ]

i could use a tow strap.... anyone wanna sell one?

Do you have a Rural king near by? You can buy a 2"x30' Keeper 20k pound strap for 40 bucks.

[mrmikey32]

i know i can go get one. but i didnt know if anyone wanted some cash for an extra.

[poorboy87]

I got a really nice one with re-enforced ends from TSC for $40

[mrmikey32]

lol, i was looking at that one, and one from farm and fleet.

which one is it?

[poorboy87]

Its white with yellow ends. Dont know how long itll stay white tho lol

[mrmikey32]

things need to get dirty. what weight is it?

[poorboy87]

I cant remember its in the jeep and its cold out. Id go get it but im lazy.
Its over 10,000 i know

[mrmikey32]

its not cold.

[redbirdrunner]

I know this may be a long shot but I'll try it anyway. My car trailer runs the same bolt pattern wheels as the chevy s10s. :rolleyes: Anyone happen to have some good steel wheels with or without tires they would like to get rid of cheap and bring with them to Winterfest? I'd take aluminum ones if the price is right but really don't like them on a trailer as they like to flex too much. Thanks guys just let me know! :cheers:

[poorboy87]

its not cold.



Fine lol went n got it.


Yellow and white. Yellow reenforced ends 2x20 with 18,000 lb
Made by Erickson

[97XJ2]

I know this may be a long shot but I'll try it anyway. My car trailer runs the same bolt pattern wheels as the chevy s10s. :rolleyes: Anyone happen to have some good steel wheels with or without tires they would like to get rid of cheap and bring with them to Winterfest? I'd take aluminum ones if the price is right but really don't like them on a trailer as they like to flex too much. Thanks guys just let me know! :cheers:

Let me call my buddy, he's got a set of steelies laying around I think.

[BIGSLVRXJ]

-I have (1) 35x12.50x15 BFG Mud-Terrain I could potentially bring. Sold only as a spare though, I would by no means run this on the street. Very weather cracked and not much tread but does hold air-$10

-Woodgrain dash bezel out of a 96 Country-$20
-Stock red front bumper from 97 Country-no endcaps-$10
-Valve cover from 98 XJ-painted "Grabber Green"-very nice-$30
-TNT Bellypan bolt/crush sleeve kit-$20
-Dana 30 factory 4.10 Ring and Pinion-$35
-Dana 30 and Dana 44 stock diff covers-FREE
-2001 Driver's side fender-stone white with wrinkle-$20
-Rough Country control arm drop brackets-everything included-$100

Paypal on these items in advance is appreciated because I'm a little strapped for cash, but I can also accept payment at Winterfest if that's easier...just look for the Industrial Yellow XJ. Let me know if interested in any of them.
Thanks,
Collin

[bmyohn]

I will have my 4 Maxxis Bighorns (35/12.50/15). Probably 25 - 30% tread left on them. Make me an offer.

[XJ&CHZ4ME]

Depending on how this deal goes this evening, I should have a set of the hard to find charcoal Eccos for sale and available for WF delivery. Price is dependant upon final inspection upon trading this evening. PM if interested.

[REWSTER]

I know this may be a long shot but I'll try it anyway. My car trailer runs the same bolt pattern wheels as the chevy s10s. :rolleyes: Anyone happen to have some good steel wheels with or without tires they would like to get rid of cheap and bring with them to Winterfest? I'd take aluminum ones if the price is right but really don't like them on a trailer as they like to flex too much. Thanks guys just let me know! :cheers:


what is the bolt pattern? ill check and see what i got but i believe they are 5x5.5 ford's steelies

[XJ Stryker]

Still got some stuff up.

HD steering Dampners (not a direct fit)

Pics on request.

Military grade Shackles. Make offer on any pair.

http://i250.photobucket.com/albums/gg274/robbymac27/Misc/DSC00008.jpg

Front SS brake lines from Rough Country BRAND NEW. 30

http://i250.photobucket.com/albums/gg274/robbymac27/Misc/DSC00008-1.jpg

z34 hood vents. 30 bucks

http://i250.photobucket.com/albums/gg274/robbymac27/Misc/DSC00006.jpg

Wheel Hub Covers. 5 bucks

http://i250.photobucket.com/albums/gg274/robbymac27/Misc/DSC00011.jpg

Gas tank skid 25 bucks

http://i250.photobucket.com/albums/gg274/robbymac27/Misc/DSC00009-1.jpg

Please PM on items.

[mrmikey32]

i need shackles.

probably the bigger ones.

[97XJ2]

I know this may be a long shot but I'll try it anyway. My car trailer runs the same bolt pattern wheels as the chevy s10s. Thanks guys just let me know! :cheers:

They are for sale (set of 4). Steel (10 holes or so), Have lived in WI, so they aren't perfect. Baldish tires. Make an offer.

[redbirdrunner]

They are for sale (set of 4). Steel (10 holes or so), Have lived in WI, so they aren't perfect. Baldish tires. Make an offer.
Are they basically a stock backspaced wheel or are they more of an offset? Need an offset wheel to get past my fenders on the trailer ideally. Not realy sure of the bolt pattern but I think they are 5x4.75. Let me know. Thanks again

[95' heep]

I will have my 4 Maxxis Bighorns (35/12.50/15). Probably 25 - 30% tread left on them. Make me an offer.

$100?

[95' heep]

I bought my recovery strap from Midland for $75, its 30 feet long, 4 inch wide, rated 30,000. best investment I ever made.

[95' heep]

by the way, I think Harbor Freight sell straps for good price but not sure how they will hold up though

[97XJ2]

They probably have an 1" more than stock as they are a little wider. 15x7 with 5x4.75" BP. He didn't give me a price, just said make a fair offer.

[XJ&CHZ4ME]

Ok, came across another item in the shop.

intake off a 99 XJ w/ I6. This is the good kind...if your looking for one, you know what it is. $100 delivered to WF.

[FlexdXJ]

Anybody got a spare tire mount. The j-hook looking thing that mounts to the drivers side that you tighten down through the center of the wheel. I had one but i have no clue where it went.

[FlexdXJ]

I have a set of Sylvania halogens to get rid of. Trade for a gallon of sweet tea.

[twistedcrawler]

I have a complete rear hatch and a set of rear passenger doors off a green 96. Also rear drivers side window. Shoot me an e-mail at russ@twistedcrawler.com if your interested or want pics. I can bring them to the badlands on the 6th.

[97XJ2]

Ok, so I checked my bank account and I :scared:.

So, I'll offer this up since I have no need for it at the moment. A NP242 with a RE H&T on it. I paid 200, if you could come close to that, its yours :D

[bmyohn]

I still have 4 - Maxxis Bighorns 35/12.50/R15s, clock spring off my XJ, tail light wiring, rear driveshaft, Borla stainless steel muffler (2.5" inlet, dual 2.5" out)

[FlexdXJ]

Ok, so I checked my bank account and I :scared:.

So, I'll offer this up since I have no need for it at the moment. A NP242 with a RE H&T on it. I paid 200, if you could come close to that, its yours :D

Oh damn do i want this or tires for the other Jeep?

[RedHeep]

Couple of things I came across when I was packing/searching for my wheeling stuff:

U-bolts for a D35, RE type, came with the lift

Front license plate mount for a 2" receiver, hidden hitch, fits in a front bumper that has a receiver in it

U-bolts are free, still in the RE box, the nuts are still bagged up. I'm negotiable on the plate mount, I think I paid $40 when it was new. Call it $10?

[95' heep]

I still have 4 - Maxxis Bighorns 35/12.50/R15s, clock spring off my XJ, tail light wiring, rear driveshaft, Borla stainless steel muffler (2.5" inlet, dual 2.5" out)


look at post #313 in this thread Hasta

[Fore Wheeler]

got a cobra 29 cb, should work, i'll check before final sale $20

MSD coil for 4.0ltr, new, still in original packaging $40

[89eliminator]

I still have 4 - Maxxis Bighorns 35/12.50/R15s, clock spring off my XJ, tail light wiring, rear driveshaft, Borla stainless steel muffler (2.5" inlet, dual 2.5" out)

how much for the muffler?

[97XJ2]

You want that lol!

[scannrman]

does any one have a set of axle shafts for a dana 35 non c-clip axle? also i have 3 good 31 by 10.50X15 mtr's. atleast 50% on them plus a 4th with a slice in the sidewall if any is interrested. i'm gonna try and make it to wf.

[bmyohn]

how much for the muffler?

$20 bucks?

[bmyohn]

$100?


Sorry I completely missed this post earlier. $100 is fine with me. But I will send you some pics of the tread just so you know how much tread you are getting. I'll take some on monday when I pick them up from the shop.

Brendan

[mrmikey32]

ill take the muffler for 20 bucks if he does not.

also, i want those military shackles... idk who was selling them

[RedHeep]

Couple of things I came across when I was packing/searching for my wheeling stuff:

U-bolts for a D35, RE type, came with the lift

Front license plate mount for a 2" receiver, hidden hitch, fits in a front bumper that has a receiver in it

U-bolts are free, still in the RE box, the nuts are still bagged up. I'm negotiable on the plate mount, I think I paid $40 when it was new. Call it $10?

Found a C4x4 (I think) D30 diff guard in the garage this morning. It's the tube, half guard kind that bolts over your stock cover.

Free to the first red member that wants it.

[FlexdXJ]

Found a C4x4 (I think) D30 diff guard in the garage this morning. It's the tube, half guard kind that bolts over your stock cover.

Free to the first red member that wants it.

I'll take it. :D

[89eliminator]

$20 bucks?

just realized it was dual outlet. im not cool enough for dual exhaust.

[bmyohn]

ill take the muffler for 20 bucks if he does not.

also, i want those military shackles... idk who was selling them

Its all yours bud. I'll bring it along.

just realized it was dual outlet. im not cool enough for dual exhaust.

lol I was kind of wondering what you had up your sleeves with a dual outlet borla for the manche.

[mrmikey32]

oh wait... didnt notice it was dual either. my stock jeep cant have dual

[bmyohn]

gotcha, not a problem

[XJ&CHZ4ME]

Found a C4x4 (I think) D30 diff guard in the garage this morning. It's the tube, half guard kind that bolts over your stock cover.

Free to the first red member that wants it.
If you meet Flexed and decide he is too much of a tool, I will gladly accept that diff guard! :D and even give ya a few beers for it!

[bmyohn]

uh oh aaron, you're not getting a diff guard anymore :D

[RedHeep]

I'll take it. :D

Doneski.

If you meet Flexed and decide he is too much of a tool, I will gladly accept that diff guard! :D and even give ya a few beers for it!

Maybe he won't want it after he sees it.

Can you put something that's been to Uwharrie, Flat Nasty, Tellico x2 and Moab on his rig?

[mrmikey32]

I've got a window attaching Badlands trail flag if anyone needs a flag...However much they charge for them in the office, cut it in half. Some newbie is sure to need one.
Dibs on that flag?

[FlexdXJ]

Doneski.

Thanks man

Maybe he won't want it after he sees it.

Can you put something that's been to Uwharrie, Flat Nasty, Tellico x2 and Moab on his rig? It'll work until i get a ruff stuff!

[XJosh95]

Dibs on that flag?

You got it Mikey!

[XJ&CHZ4ME]

Ok, came across another item in the shop.

intake off a 99 XJ w/ I6. This is the good kind...if your looking for one, you know what it is. $100 delivered to WF.


this is now SOLD

[HaleYes]

01' intke manifold. I'll leave all of the sensors on it. This is the roundy corner one, not the square corners.

$100.

[Pat]

I have a few items:

Trailmaster drop brackets (same idea as RE or RC) with vertical brace from back of drop connecting to a flat piece that runs along the bottom of the frame rail and captures the t-case cross-member bolts.
I have all brackets and spacers.
$100 obo

Currie D30 draglink and Goferit HD tie rod with Dodge 3/4 ton TREs. These TREs have the same taper as stock D30, so will bolt right up to stock knuckle and Currie draglink. I would recommend replacing the TREs for significant road driving. This is a BEEFY set up that would run about $400 new. I will throw in stock steering as well for spares (never needed them).
$150 obo



Anybody want this stuff? Make me an offer...would like to unload at WF.

[BOB]

I just found a set of stock D30 axleshafts.
not sure what size joints.
good trail spares.
$100

BOB

[redbirdrunner]

Hows 20 bucks sound?

They probably have an 1" more than stock as they are a little wider. 15x7 with 5x4.75" BP. He didn't give me a price, just said make a fair offer.

[97XJ2]

I'll pass the word, If he accepts I need to make a call to make sure they get picked up.

[redbirdrunner]

if he doent let me know his price

[97XJ2]

He was thinking 10 each. Sorry I don't have any pix for you. Let me know ASAP, I have to make sure they get on my buddies trailer headed out tonight

[bmyohn]

The tires (35s) are no longer for sale. One has a huge chunk missing out of the tread, and one actually has a nail in it, which I guess has been in there for a while because its really worn down. So they aren't for sale

[BOB]

I am picking up a cb antenna, shocks, boxes and cigars...I better stop at the Bank for some Cash!!

BOB

[seanR]

I have a sony Xplode stereo that was in my jeep, then in my pick up, then in the motorhome, now in a drawer.
If some one wants it, I will trade for booze....

[97XJ2]

model #?

[XJ&CHZ4ME]

I have a sony Xplode stereo that was in my jeep, then in my pick up, then in the motorhome, now in a drawer.
If some one wants it, I will trade for booze....


sean, I will trade ya for booze...call me w/ your booze request...ya got my digits.

Cheeseman-OUT!

[mrmikey32]

I need fog lights..... mine are done.

[bmyohn]

I just put my old 35s out at the dumpster by my apartment. Keep in mind these have almost no tread, on nail in the tire, and one has a chunk missing out of the side wall lug. These tires were gone in 15 minutes, no joke. Who take 3 big bald tires?

[97XJ2]

Ship has sailed on those s-10 rims. I am not in the same town as them and it would have relied on someone else picking them up for me, but they will be out of town shortly.

[XJosh95]

If somone wants a stock battery tie down kit minus the tray...free. Lemme know!

[seanR]

I have a sony Xplode stereo that was in my jeep, then in my pick up, then in the motorhome, now in a drawer.
If some one wants it, I will trade for booze....

SOLD! to the ugly fugger in Missouri for a bottle of Jack....

[HaleYes]

I've got a set of 3, 35" Bighorns for sale. They're nearly bald, one has a nail in it, one has a big chunk missing out of a sidewall lug.

First $50 takes them.

[bmyohn]

I've got a set of 3, 35" Bighorns for sale. They're nearly bald, one has a nail in it, one has a big chunk missing out of a sidewall lug.

First $50 takes them.


give ya 10 for em, i just mis-placed my set. i wonder where they ran off to.

[HaleYes]

give ya 10 for em, i just mis-placed my set. i wonder where they ran off to.

Sorry, I'm staying with my $50.
They'd make a killer tire swing.






:cheers:

[bmyohn]

dang they really would. i didnt think of that! we dont really have a tree that would work well for one but it'd be cool nonetheless.

I am going to get the 4th tire remounted in place of the big 36" IROK that i got last year as a spare but didn't get to use because I had an exam.

But if anyone's looking for a cheap larger tire for a spare I have that 36" IROK for $15.

[HaleYes]

If by chance the Frankenspare gets sent home with me...............it WILL be a tire swing for a year.:D

[mrmikey32]

does anyone have a full size stock tire?

i could use a spare

[bmyohn]

The FrankenSwing....I like it!

[Pat]

If by chance the Frankenspare gets sent home with me...............it WILL be a tire swing for a year.:D

Frank must be stored inside to prevent the historical sigs from washing off.

[BRIANHO13]

Frank must be stored inside to prevent the historical sigs from washing off.

I agree, but I don't think we have anything to worry about, he would have to wheel to break.:D

[IllianaXJ]

I have one MWC camo hat I can part with. Due to my child-like size, most hats don't fit or look right on me. Such is the case here. Bought it, wore it once and now it stays in the closet.

Looks like this one:

http://img.photobucket.com/albums/v647/haleyes/100_5376.jpg

Limited Edition, no longer made!

IIRC they were $15 new, how about $10?

[redbirdrunner]

Ship has sailed on those s-10 rims. I am not in the same town as them and it would have relied on someone else picking them up for me, but they will be out of town shortly.

Sorry man but I work 3rd shift and slept all day, thanks anyway tho!

[REWSTER]

does anyone have a full size stock tire?

i could use a spare

if my brother gets his new tires on i could get you one of his old ones as a spare but i wont know till Friday night
235/75/15 pretty bald street tires

[97XJ2]

Sorry man but I work 3rd shift and slept all day, thanks anyway tho!

No problem, the logistics just didn't work.

[cardboard]

dang they really would. i didnt think of that! we dont really have a tree that would work well for one but it'd be cool nonetheless.

I am going to get the 4th tire remounted in place of the big 36" IROK that i got last year as a spare but didn't get to use because I had an exam.

But if anyone's looking for a cheap larger tire for a spare I have that 36" IROK for $15.
Ill take that 36" IROK. Just bring it with if you would.
Cardboard

[IllianaXJ]

I have several orange flags I will throw in for whoever needs one.


Little late now, but I went out to load these up, and all the flags I had are gone. I had to scrounge to find one for myself.

Sorry guys, should have checked before I posted. :twak:

[bmyohn]

Ill take that 36" IROK. Just bring it with if you would.
Cardboard

shoot man, i have already left my folks house and it in their garage. I can get it to you some other time since you are in south central indiana. sorry bud, i wish i had seen this sooner

[XJRN]

So when is the swap meet? Is there any formality to this or is a seek and find of who has what?

[HaleYes]

So when is the swap meet? Is there any formality to this or is a seek and find of who has what?


No, there's normally not a specific swap meet time. It's just find the guys that you've got deals with when you have time. After the Sat. night dinner @ the campground is a great time to do it.