How to rebuild dana 35c Limited slip?

Hello,

I found some broken discs in my Dana 35C limited slip "locker".
I bought a rebuild kit from eBay.
My question is, how do I rebuild it? is there any guide here? pictures would be great too...
It's 2001 Cherokee XJ.

Thank you,
Saar.

Not directly for a D35 but they are all pretty much the same.
http://www.mustang50magazine.com/techarticles/m5lp_0705_traction_lok_differential_rebuild/index.html

You go to the Junkyard and get a 8.25 axel.

93gc40 said:

You go to the Junkyard and get a 8.25 axel.

Click to expand...

Hi,

Thank you, I will read that soon.
As for the 8.25....
I live in Israel, we do not have those 8.25 in the junk yards and if so, it costs around 700$...

So fixing my dana 35 is the cheapest way to go :-(
(If and when we replace the rear axle here, it is to Dana 44 which is much more common here)

Thank you,
Saar.

Saar, you might want to think about dropping the coin at http://www.techauthority.com and getting a copy of the Factory Service Manual. At least for earlier years, it's got pretty good descriptions of gear & diff work. It's also got just about every bit of info you could want about your XJ.