jeeper01
NAXJA Forum User
- Location
- North Carolina
changin radiators and dont know how to get the loewer trnny line off of the old radiator?!?!? help!!!
-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
TRANNY COOLER CONNECTOR
- Thread starter jeeper01
- Start date
JJacobs
NAXJA Forum User
- Location
- Fort Collins CO
It takes a special tool to push into the connector and release all the little holding tabs. Some fuel line tools will work on those.
jeeper01
NAXJA Forum User
- Location
- North Carolina
thanks fpr the prompt reply. we jus decided to cut it right behind the clamp and slide the hose over the new fitting and clamp it down
Yucca-Man
NAXJA Member # 683
- Location
- Castle Rock, CO
Even though you have solved it already, in the event anyone actually searches for this, you don't always need a special tool either. The female portion of the connector under the ears often gets grime underneath it - I actually found a use for WD-40 and use the small tube to wash out the underside of those tabs. Once the underside is clean, press the tabs together (finger or pliers) and pull the line out. The tabs stay with the female portion of the line and come in a quick-install kit from the dealer.
