-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
vacume
- Thread starter POLmagnum
- Start date
joe_peters
NAXJA Forum User
- Location
- Grants Pass, OryGun
If stock, the vacuum reservoir is behind the front bumper, passenger side.
Vacuum to heater & a/c blend doors, and depending on year/equipment the heater control valve, the vacuum disconnect motor on the CAD D30, possibly the transfer case 4x4 switch.
Vacuum to heater & a/c blend doors, and depending on year/equipment the heater control valve, the vacuum disconnect motor on the CAD D30, possibly the transfer case 4x4 switch.
- Location
- Rainy side of Washington
Also supplies the cruise control solenoid.
Well I know I dont have one,the bumper on mine was somewhat modified (well cut off and replaced w/a square tube bumper) when I bought it, there are a couple of vacume lines just hanging down, now that I know what goes to it I just need to figure out where to mount it when I get one any suggestions?
joe_peters
NAXJA Forum User
- Location
- Grants Pass, OryGun
In my Renix 90 I mounted the vacuum reservoir on the passenger's side firewall, just below the pressure bottle.
Similar threads
