To-Do List

[stewie]

The week is fast approaching.party1: Whats on everyones to-do list for the trip?:repair:

Heres mine:
finish fabbing rear bumper tire carrier
order and weld up iron scorpion front winch bumper
weld on new spring perches on rear axle
rocker replacement
weld on raised shock mounts
new shocks
change/fill all fluids

i know there will be more to add later...

[Israel]

Started on the to-do list last month, so I've got a couple done already:

Wrangler Rubicon t-case swap - Done!
Build roof rack - Needs to be powdercoated, then it's done.
Replace rocker panels and add door guard tubing - need to be welded in place and painted.
Treks (T&T) frame stiffeners
Build high clearance crossmember
Build front and rear long arms
Swap in 1 ton axles
H2 wheels and 35" tires
Sand and powdercoat front bumper
Tune up
Detail interior

[DrMoab]

Get in Jeep. Start it. Head to Moab

[stewie]

Detail interior

what is this blasphemy you speak of?

[Israel]

Don't worry, my version of detailing entails removing the trash and junk, vacuuming and wiping most of the dust off the dash. I may even wash the inside of the windows. Nothing too time consuming. :)

[WayneXJ]

Get a job so I have money to make the trip.

[XJumpmaster]

Get a job so I have money to make the trip.
X2!!!1

[nochance9]

X2!!!1

X3 except get a job so i can offord parts to keep up with the big kids..... 8.8 build is my goal. I'm taking donations if anyone feels so inclined. haha i was planning on selling this genorator i fixed up which would more than pay for it but.... Turns out someone is trying to scam me and i've got to wait till the FBI tell me it's okay to repost it on the internet. This guy thinks i'm going to go through with it still and would probably know i'm not serious with him if i put it back up for sale again haha. And i want the turd caught!

[stewie]

Heres mine:
finish fabbing rear bumper tire carrier bumper done, tire carrier underway
order and weld up iron scorpion front winch bumper aint gonna happen
weld on new spring perches on rear axle
rocker replacement done!!
weld on raised shock mounts
new shocks
change/fill all fluids

i know there will be more to add later...

add replace water pump

[old_man]

I'm still on the fence about going, but I am trying to finish off my wristed radius arms, hydro steer, find my Tera2low I lost in the move and install it, and repaint the hood.

[Israel]

Started on the to-do list last month, so I've got a couple done already:

Wrangler Rubicon t-case swap - Done!
Build roof rack - Done!
Replace rocker panels and add door guard tubing - need to be painted.
Treks (T&T) frame stiffeners
Build high clearance crossmember
Build front and rear long arms - not going to happen by FF
Swap in 1 ton axles - not going to happen by FF
H2 wheels and 35" tires - not going to happen by FF
Sand and powdercoat front bumper
Tune up
Detail interior

[logdog]

Started on the to-do list last month, so I've got a couple done already:

Wrangler Rubicon t-case swap - Done!
Build roof rack - Needs to be powdercoated, then it's done.
Replace rocker panels and add door guard tubing - need to be welded in place and painted.
Treks (T&T) frame stiffeners
Build high clearance crossmember
Build front and rear long arms
Swap in 1 ton axles
H2 wheels and 35" tires
Sand and powdercoat front bumper
Tune up
Detail interior
is this a to-do list or a wish list??? :gee:

[Israel]

At the rate I'm getting them done, definitely a wish list. :D

[mcantar18c]

Build front bumper
Get new front DS
MAYBE swap axles... again
Fix wipers, although that was on the COfest to-do list too
Go doorless
Make a set or two of stiffeners to give away, and maybe some other crap

[old_man]

I have just about finished my wristed radius arms. Only about an hour of work left. Tomorrow hope finish that off and to get my hoses made for my hydro assist steering. Might save some work and buy some premade weld on tabs.

[Israel]

Started on the to-do list last month, so I've got a couple done already:

Wrangler Rubicon t-case swap - Done!
Build roof rack - Done!
Replace rocker panels and add door guard tubing - Done!
Treks (T&T) frame stiffeners
Build high clearance crossmember - WIP
Build front and rear long arms
Swap in 1 ton axles
H2 wheels and 35" tires
Sand and powdercoat front bumper
Tune up
Detail interior
Change Title of list from "F.F. To-do list" to "Rubicon To-do list" - Done!

I just bought myself 9 months by changing the title of my to-do list. Sweet!

[old_man]

When I moved last year, my Tera2low got misplaced. I found it last night. I guess that means I have to drop the tcase and do a bit of upgrading. If I can find a new wide chain, I will do that upgrade as well.

[Jeephead87]

-Replace limiting strap on rear axle.
-Add more tubing to rock rails.
-Make tire mount for roof. Maybe???
-Put doors back on.
-Help buddy get his toyota "Moab worthy"!!!
-FIND TRAILER! :scared:

[Exxon Valdez Jeep]

Finally drove my jeep today. Its got abunch of pops and squeaks but I think it'll do.

[old_man]

Got the wristed radius arms finished. Almost done with the hydro assist.

Going to overhaul the NP231, add a wide chain and a Tera2low.

If I get time I am going to do a roof rack, or at least a mount to get my spare out of the back for now.

[XJumpmaster]

Fuel up and go!


Hopefully, I won't have any mishaps like this last weekend with a blown tire on the RV. Which is why I'll be tenting it.

[Andy Steiner]

Motorhome packed. Got to load food Friday. Still got to BUY some food Friday.

Tune-up and throttle body cleaning Friday. Or maybe in Moab.


Just finished making interior cargo rack taller. Originally it was built only high enough to fit a 31" tire underneath. Was also limiting on the size of tubs I could use. It's taller now; will allow a 33" tire to fit. I can finally fit the cooler underneath as well. No more need to ratchet strap cooler on top.


Rack 1.0
http://i2.photobucket.com/albums/y33/andysteiner/off%20road/Upgrades/DCP_1626.jpg

Rack 1.0
http://i2.photobucket.com/albums/y33/andysteiner/off%20road/Upgrades/DCP_1629.jpg

Rack 1.1
http://i2.photobucket.com/albums/y33/andysteiner/off%20road/Upgrades/100_6264.jpg

Rack 1.1 (Damn hard to find longer J bolt)
http://i2.photobucket.com/albums/y33/andysteiner/off%20road/Upgrades/100_6266.jpg

Rack 1.1 (Firmly secured Hi-Lift Jack)
http://i2.photobucket.com/albums/y33/andysteiner/off%20road/Upgrades/100_6267.jpg

Rack 1.1 (Loaded for wheeling)
http://i2.photobucket.com/albums/y33/andysteiner/off%20road/Upgrades/100_6273.jpg

Rack 1.1 (Hi-Lift Jack, shovel, folding table and chairs)
http://i2.photobucket.com/albums/y33/andysteiner/off%20road/Upgrades/100_6274.jpg

Rack 1.1 (Emergency gear, spare parts, tools, water, recovery gear)
http://i2.photobucket.com/albums/y33/andysteiner/off%20road/Upgrades/100_6277.jpg

[Vince]

That's a really tidy installation Andy. I'm going to have to do something like that for mine but with the rear seats still usable.

[Boatwrench]

Buy airline tickets.
Reserve rental car.

[MJR]

That's a really tidy installation Andy. I'm going to have to do something like that for mine but with the rear seats still usable.

What's not usable about his back seat?

Posting from Barstow, Moab here I come. :)