Feeler: Bored Throttle Bodies

[trail rate this]

Who is looking for one? I can do them 60mm and 63mm. I would do it on a core basis.

People that have one of my TB's are: Me (63mm), Mr. Shrek (60mm), and JeepAddict85 (60mm). Mbagosia had one when he had an XJ. I've sold a few on ebay.

[Mr.Shrek]

Drove Eric's jeep around with the 63mm and noticed a difference, but wasn't sure how much of that was his newer jeep verse my 91. He threw my 60mm on and I noticed a considerable difference on the way home. Thanks Eric.

[DansGreyMj]

Would it be worth it on a Renix?

[trail rate this]

I dont know, I've never done a Renix?

[Cherokeekid88]

How much are you charging?

[High2by]

What is on the white one now Eric?

[rredalty]

Are you cutting new plates for the 63mm than? What's the cost for a 63?

[trail rate this]

I am cutting new plates. I want to get $80 for 63mm since they are a lot more work. I think they for more than a hundred on Ebay plus a core.

[trail rate this]

What is on the white one now Eric?

PM'ed you.

[nickjc13]

how much for one shipped to 39531. pm me please. also i need it in a 63mm for a 94

[trail rate this]

how much for one shipped to 39531. pm me please. also i need it in a 63mm for a 94

PM sent

[rredalty]

What's your turn around time like on a 63?

[trail rate this]

Probly a day or two for a 63mm. I would have to do it in the mornings and evenings. A day for a 60mm.

[southernrebel20]

I'd like to do a 63, PM the details such as shipping cost to 30078 and total price, im very interested in this.

[trail rate this]

I'd like to do a 63, PM the details such as shipping cost to 30078 and total price, im very interested in this.

You have been PM'd

[rockcrusher]

would you want to try a renix pm me ill give you more info

[JeepAddict85]

Eric i'd be up for upgrading my 60 to a 63. No rush though...i may just grab one from the junk yard this weekend, thinking about hitting pullapart.

He does a great job on these...i noticed a huge increase in throttle response on my 2000 when it was put on.

[element96x]

I wanna do a 63 also, same with what southenrebel said shipping to 18705, I have a couple of throttle bodies laying around that Ive, "found" in my bag after i got home from a day to the junk yard if i buy one of your bored ones ill prob send you like 1 or 2 extra if i could find them in my pile of parts as i have no use for them.

[JeepAddict85]

I got the 63 from Eric...trust me guys its worth it. It makes a huge difference. I can get my 33" muds spinning quite well on dry pavement now :)

[trail rate this]

I got the 63 from Eric...trust me guys its worth it. It makes a huge difference. I can get my 33" muds spinning quite well on dry pavement now :)

Thanks Greg! I know they were squealing pretty good after it put it on last Friday.

[High2by]

I might be in for a 63 as well.

[trail rate this]

I might be in for a 63 as well.

Just let me know when your ready

[DansGreyMj]

I'm probably going to pull a part soon, how much if i shipped renix tb to you and you shipped it back when done?

[trail rate this]

I'm probably going to pull a part soon, how much if i shipped renix tb to you and you shipped it back when done?

I don't see it being more then $10

[lsc910]

Looking into getting a 62mm from you, PM me how much to send to 08094 with total cost please.

[bosco01xj]

Hey greg, I noticed last friday after eric put in that 63 your check engine light came on. I forgot to ask you about it then. Was that on before hand or did that click on after the swap?

[DansGreyMj]

I don't see it being more then $10

no i meant bored and shipped back.

[JeepAddict85]

Hey greg, I noticed last friday after eric put in that 63 your check engine light came on. I forgot to ask you about it then. Was that on before hand or did that click on after the swap?

its been on for 3 months...it comes and goes. its an 02 sensor after the cat that occaisionally gets a low voltage reading. just putting on a bigger throttle body wont do anything besides get your engine more air, faster...:peace:

[stoneyva21]

bored and shipped to 22030 please.


heading to a pick and pull this weekend, if you would like a few extra tb's let me know too

[POLAR_JEEP_04]

quote- 97 4.0 to 63mm shipped to 43081 please

[trail rate this]

Ok, I have been getting a lot of interest for prices on these. I PM with prices and never here back. So, here are the prices:

62/63mm are $80 (they go for $90-$160 on ebay and they are a lot more work than a 60mm.)
60mm are $40 (can't tell you what they go for on ebay, I didn't see any)

$10 shipping any where in the U.S.
$40 Core charge. (Pull-a-part charges $30 for one with all their BS, and an extra $10 for gas, time, and trouble if I have to go get one because you didn't send me your old TB. You will get the $40 back once I get your old TB.

If you send me one first then I will not charge the core.

I do accept Paypal.
I will also need to know what year you need.
PM me for my address. If you are going to send me your TB first just send a check with it.

Thank you,

[knockedout88xj]

I need a 60mm for a 87' 4.0inline, how much and what will be the differnece?

[peej08]

If I put a 60mm on my 98 do i have to do anything to the intake?

[trail rate this]

isn't that a Renix?

[POLAR_JEEP_04]

If I put a 60mm on my 98 do i have to do anything to the intake?


nope

[Ghost]

Closed until BOD decides on policy of vendors in For Sale section.