- Quick rollcage ?
- 3-link
- Design, geometry and functionality of tracbar-less suspension
- REAR 1/4 Elliptical suspensions for XJ's
- four link conversion
- the wishbone project-waayy too many pics-
- The Wishbone MIGHT work! lotza PICS
- Okay....exhaust time...have a wierd idea
- Front suspension geometry...lets get in depth...
- Cagey Happenings at URF
- Coil-Over Shocks
- Exo vs Internal Cages
- I need design advice! *long* :mad:
- 3link wishbone or single Triangulated 4link rear? ideas, pics.
- What does your rig weigh?
- Front Wishbone Help
- The front leaf spring thread. who's doing it now? what have you learned?
- 4-link geometry? Double Triangluated.
- front 3 or 4 link planning....some brainstorming needed
- Forget 44s and 8.8s...lets talk Toyotas
- Hey Jes, you building a front 44?
- please criitique my cage.......
- OkieFab SYE teasers
- Finished Okiefab SYE pics
- Done with the Drive Shaft
- Crash! Hidden Long arm?
- My front d60 experiment.
- the dana 60 35-spline thread
- XJ/MJ weights and dieting
- The JD is parked in the barn. Time to play with da CAT
- Dual t-cases eb dana 20/4:1 Klune V or just Rubi rock-trac 4:1 with an auto XJ, other
- Coilover Spring Rates
- New tech filled mod!!!
- Progress on my attempt at a hidden LA 3-link
- spring rates...corner loads...coilovers
- Welcome
- Tube Notching for dumb dumbs
- 3 link rear MJ coming soon
- Radius Arms to the xj unibody.
- Lets talk custom axles
- 4 link without a panhard
- URF 3 link questions
- best welding rod for axle housing?
- Purchasing tubing...questions
- Rear link suspension thought?
- 3 link mid arm....update
- laminated cross member( so to speak )
- 4 links and HP44 front problems
- Making bumper, few questions.
- Cheap (relatively) axles thought?
- Welding (MIG) Aluminum
- Rear four link
- Crossover steering and swaybars
- Plans for a 'removable' roof
- Welding to unibody
- Draveshaft disc parking brake
- Just having a little fun....ouch!
- Bending 1/4" plate
- welding to axle housing
- two lower longarms and torque arm...
- Axle Flange Welding
- Pitman arm hitting tie rod
- XJ on a frame?
- Black "poop" Pipe Cage
- Dana 60 rear ?
- Hybrid D44
- narrowed d44
- trackbar building question.
- help me finish my cage
- Shaved 60...Too Much?
- one link
- housing spreader
- Need some inspiration
- hp60/coilover swap on the XJ...
- thats it I'm going Rockwells
- A better dana 300 twinstick
- welding on leafs?
- design help for lifting tire carrier
- Prelim thinkin' about a cage
- Pics of my 9" shave (no 56k)
- Trying to set up 3 link front
- Need help from axle tube gurus. I messed up bad.
- advice for buggy project
- bumper blueprints
- Framed XJ
- Pics Pics Pics of more nine inch stuff. How's my welding/setup/etc?
- replaced rockers attached to cage
- rear shocks through floor, ideas?
- Inboarded radius arms.
- Gauge of unibody
- Gusseting The Inner Knuckles
- Building an aluminum roof rack?
- Turning XJ D30 knuckles?
- long arms
- shock location up front
- 3 link vs radius arms
- ?Relocate Rear shackle mounts for Longer Leaves
- Coilovers on the XJ......
- suspension Qs
- Rear 4 link w/SAW air shocks progress pics
- optimum location of Ford radius arms?
- experiences with air shocks on the rear?
- TIG or MIG?
- My front and rear 44 swap progress (56k beware)
- Anti-squat
- Diff housing stiffening and truss design
- front suspension concept?
- Shock Towers/Hoops
- 350xj's Front Leaf Spring Build-up pics
- Boxed rockers...
- Roll cage design/half topless
- Retubing axles
- What size sqaure tube?
- I need a suspension analysis, CAD drawings included
- 9" section detail dwg. ?
- Exo Cage design
- HP D60 modifications for rear use?
- Four link rear/URF three link front shakedown pics
- Polishing a turd?.....
- Front D44 axle brackets
- EZ-3d bend-tech XJ cage files?
- Another cage.. What do you think?
- Cage to Frame tie-ins
- Gusseting tubing.--- Questions.
- rear 4 links question
- 44's and 3 link test run
- cage builders ??
- home brew crossmember skid
- The CAT Gets a Little Closer to Buggification (no puppy pics...)
- Ford cast Raduis arm mounts....
- A different cage
- converting pas. side drop to driver side
- 35spl shafts in a 30spl d60
- Master Cylinder
- The official Xota build thread
- My cage
- FINALLY, start my XJ project!!
- pocketing frame for long arms...any thoughts?
- Volume formula...am I right?
- NV4500 in an XJ
- And the buggy begins!! (some suspension pics and q's)
- dana 44 inners
- custom long arm kit
- Trussing a FORD 8.8?
- D30 & D44 Truss Designs - Input please?
- Poor mans' anneal
- proper gusseting
- Buggy building on a budget
- Redneck & Backwoods, yet why wouldn't it work?
- growth spurt
- Brackets for RE Superflex joints?
- roll bar question
- who is running ram assist steering?
- Another XJ cage......
- yet another 44/60 frankenaxle!!!
- Critique my preliminary cage ideas...
- Really Advanced.
- Another fullwidth XJ build
- 1-3/4" x .120 control arms?
- 7hrs. to make a trac bar work!!!HELP
- Fabbing a tranny mount...
- Guide to Searching!! *Update*
- Another XJ cage design thread, with an ME twist.
- Exo Cage tubing size?
- track bar mount on pas drop axle?
- metal on metal hdim `int???
- My latest fab work!
- Convertible XJ project
- Another Question of chop tops
- axle mounts/brackets
- cage drawing, help is welcome
- madrooster dual t cases??
- lowering the upper shackle mount.
- RC D44 Swap questions....
- rear steer
- exocage
- MJ truggy
- exo-cage
- do i really need a bender for roof halo on cage
- Xota - adventures in sheet metal
- reinforcing rear part of Frame (Cross member)
- gringing welds from inside tube
- Designing a winch bumper
- Rear HP Dana 60 project update
- long Arms, radius vs 3 link
- Arm material.....
- Crossmember desighn......
- Low rear link suspensions
- installing HP dana 44
- custom steering pics
- D44 Steering Tubing Spec
- Is the a cheap way to get there from here?
- Chopped top SUT style?
- Lower Control Arm Question help!!!
- Dana 44 hub girdle?
- Dodge "hub-less" hardware.....
- Crossmember Beef Tech
- Please help!!!
- Tubing
- Is the WCGIC rubbing off on me?
- four link setup
- My rear end...
- Axle braketry/Front Suspensions....
- HP 44 up front
- chop top...and before you say it, i looked and looked for this
- Interior cage
- Axzilla Jr. (HP44) housing done
- What track width for Hybrid 44/60?
- Hubs Smubs, Flanges Smanges.
- Home made SYE
- 4 door xj into 4 door pickup
- Interior cage to cab tie-ins
- chop and cage
- I need some welding advice
- Cutting up the hatch, making it usefull!
- Track bar tubing
- building longarms
- Axles for 38's
- Trussing front D44
- Bending plate
- trackbar length
- What to do?
- Getting there, but have a ?
- What ends do you recommend for custom track bar?
- Splatter and MIG
- Anybody running a hp 60 '85+ with stock xj coils
- Suggestions wanted..........on a cage
- Rad in the Rear
- LP Dana 44 Front
- Four link numbers/measurements - advice?
- xj frame stiffining
- Rotten rockers
- Machining Flat Tops
- Quarter Elliptical Tech
- Shocks attached to LCA's
- Raised crossmember - exhaust routing
- High 9 inch pinion angle
- Fun with plasma (and some welding, too)
- Another dumb cage question
- 8 bolt rotor for rear disks?
- making your own beadlocks
- Revolutionary Suspension Design
- 4130 tig rod
- decisions...decisions
- Cage blueprints
- 4 wheel steering
- What makes a good weld?
- bushings for custom fab.
- Tuning Bilstien 7100's
- hp 44 truss